From inside to outside a quality job to be proud of.
On the left, an example of a concrete crawl and main suction point.
On the right, a white fan housing and color matched downspout going above highest eaves.
 
 
 
A simple sump installation on the left.
On the right, a more complex sump with a battery sump backup that we installed at the time of mitigation.  A good idea if your basement is finished or going to be finished!
Don't worry, all of that white caulk will dry clear in a day or two and you won't even notice it.
 
 
 
 
A sealed gravel crawl on the left.
Right, an example of a U-tube  (looking like a "J", indicating the system is running) and the GFI outlet that we install.
Notice that everything is labeled and if you ever have a problem, our number is right there. 
 
 
 

 
 
  
 
Left, a close-up of a main suction point. Notice the special floor fitting we use. We are the only company in northern Illinois to use these and they ensure a tight seal to the floor without having the pipe slip down into it. We actually have them made for us in NC.

On the right is a complete basic system showing pipe,   U-tube,  GFI and caulking.
 
   
 
On the left, an example of a pipe run through the basement. Notice the use of the J hooks to support the pipe. This is another element of our superior quality as they provide absolute stability of the pipe

To the right, an exterior fan housing (behind the bush) and the color matched downspout going up and above the eaves.